EZpiet Sky Scout Laser-cut Kit

$75.00

A complete precision laser-cut kit for our EZpiet Sky Scout sport scale RC model aircraft.  This kit includes all necessary hardware, strip wood stock, plans, and construction article to assemble the EZpiet Sky Scout airframe.  Designed and laser-cut by Stevens AeroModel for balsabuilder, the core airframe components feature tab and notch construction to simplify the build process.

Made in Colorado, USA

Item Number: FK013
Published 2017: Issue 5 of balsabuilder magazine
Wing span 31.5 in. | Wing area 190 sq. in. | Flying Weight 7.5 oz.

Description

This is a novice level sport scale kit that requires basic modeling skills to assemble.

Kit Includes

  • Plans, full-size computer drafted including parts templates
  • Laser-cut balsa parts (all formers and ribs are precisely laser-cut)
  • Balsa Strip Wood
  • Hardware (push-rods, control horns, fittings, etc…)

Required Electronics (available from stevensaero.com)

  • Servos, two Hitec HS-35 or HS-40
  • Transmitter with Micro Receiver (at least 3 channels)
  • Brushless Motor, SA Sport BL250 (1510-15)
  • Propeller, GWS 7×3.5 HD
  • Speed Control, 10A
  • Battery, 7.4V 550mAh LiPo

To assemble this kit you’ll need:

  • Glue (medium CA suggested)
  • Covering Film, 1-2 rolls (AeroLITE suggested)
  • Hobby Knife
  • Sanding Block (120/240 grit)
  • Building Board (make one! see our pilot issue)
  • T-Pins
  • Tape, clear and low tack masking

Reviews

There are no reviews yet.

Be the first to review “EZpiet Sky Scout Laser-cut Kit”