SPORTstik – Plans

Additional Details

Printed plan set to scratch build the SPORTstik 4-Channel sport electric RC model airplane – as printed in balsa builder Magazine (Volume 1 | Issue 4).

Includes:

• 22 in. x 34 in. printed plan set (folded)

To scratch build the SPORTstik you’ll need:

• Balsa wood sheet stock (1/16, 3/32 in. and 1/8 in.)*
• Plywood sheet stock (1/32 and 1/16 in.)*
• Covering film, 1-2 rolls AeroLITE
• Hardware (10mm square fuselage and GWS Slow Stick fuselage plastic parts)

Balsa Strip Wood Required:
(Available from your local hobby or arts and crafts center)

• 2 Leading edge stock, 1/4 square x 24 in. length
• 2 Trailing edge stock, 1/8 x 3/4 x 24 in. length
• 2 Sub spar stock, 1/8 x 3/8 x 24 in. length
• 4 Spar stock, 3/32 x 3/16 x 24 in. length
• 4 Spar cap stock, 3/32 x 1/4 x 24 in. length
• 6 Turbulator spar stock, 1/8 x 3/16 x 24 in. length

Suggested Electronics:

• SA Sport Park BL-450 electric (or similar)
• SA Sport 30A Brushless ESC
• 4 – Hitec HS-55 servos
• 1 – Micro Receiver

See the construction article in Volume 1 | Issue 4 of balsabuilder magazine for more details

Looking for the SPORTstik laser-cut parts package? – Click Here