WingIt! Building System (WK002)

Additional Details

Base Specifications:

The second offering in our WingIt! building system featuring a 40 inch span, 8 inch chord, and Clark-Y airfoil.  Add your own aileron and wing tip shape to increase the chord and span.  Combine multiple wing kits to produce higher aspect ratio wings (glider application) or clip the base wing for low aspect ratio applications.

Wing Span | 40 in
Chord Length | 8 in
Wing Area | 320 in2
Dihedral Options | 0/8/12 degrees
Controls Required | 3-4 channel
Construction | Balsa / Ply
Category | Wing Kit

Kit Includes:

Laser-cut provisions to build one wing with 0, 8, or 12 degree dihedral.  Includes basic assembly instructions and template paper for accommodating your own design ideas.

• 14 chord length ribs (4 center, 2 tip, and 8 mid-span)
• 8 interlocking sub-ribs
• 14 engineered spar webs
• 14 interlocking trailing edge gussets
• 12 twist resistant truss ribs
• 2 plywood servo pockets (HS-55 class)
• 2 interlocking plywood dihedral breaks (8 and 12 degrees)
• 1 engineered center section base sheeting
• Full size plans on graph paper for easy integration of your own design ideas!

Balsa Strip Wood Required:
(Available from your local hobby or arts and crafts center)

• 2 Leading edge stock, 1/4 square x 24 in. length
• 2 Trailing edge stock, 1/8 x 3/4 x 24 in. length
• 2 Sub spar stock, 1/8 x 3/8 x 24 in. length
• 4 Spar stock, 3/32 x 3/16 x 24 in. length
• 4 Spar cap stock, 3/32 x 1/4 x 24 in. length
• 6 Turbulator spar stock, 1/8 x 3/16 x 24 in. length